IR Mapio edge blending demo from Vladimir Dronov on Vimeo.

0 Comments Read More

Changelog:

• Fixed: jumps when you press any key modifier after start dragging of a vertex or edge.
• Fixed[MAC OS]: add the file suffix when save a project.
• Fixed[MAC OS]: work blue area's sliders.
• Fixed: editing of "Density of grid" fx using the mouse wheel.
• Changed: more accuracy for the function of mixing in the "Edge blending" fx.
• Changed: the function of combining a inverted mask.
• Added: gamma correction for each areas for the Edge blending fx.
• Added: open the hotkey window by F1, close by ESC.

Download

0 Comments Read More

IR Mapio download - Windows - Mac OS X

Changes in version 1.2

New effects

“Edge blending” - Tip: The Auto input overlapping mode allows you to place input areas edge-to-edge without overlapping. Make sure that blending areas (marked by red rectangles) do not go beyond the working zone; otherwise you will get black bars in the output.
“Density of grid” – This is the editor of vertical or horizontal frequency of nodes in the grid. Tip – Use the CTRL key to enable the drawing mode and to change the value in the current block with the mouse wheel.
Curvature of edges by Bezier curves -  look at the picture, everything is just simple.

 

Improved effects

• Masks – Now it is possible to move the entire mask as a whole, as well as a facet separately. Also you can insert a new vertex by double-clicking a facet. These improvements are related only to polygon masks. Manipulations with ellipse masks remain unchanged.

New features

• Lock areas from accidental changes. hotkey "L".
• Switch between areas quickly using hotkeys "1-9", "0".
• Solo Edit mode lets you disable snapping of nodes and area facets.
• Resize the current area relative to the center by clicking PageUp / PageDown.
• New option to show vertical and horizontal guide lines which divide the working zone to 2 and/or 3 parts.
• Added the snap-in effect to the corners of the working zone and to the guide lines.
• New About dialog in which you can activate the License key, see the version and other information. A separate application called "Mapio Activation" has been removed.

Other changes

• Switch between areas (select the current area) by double-clicking, earlier it was possible on a single mouse click.
• Now zoom can be less than 100%. Also a new option called "Allow to drag outside" is added to Settings. It allows you to move area nodes outside the working zone.
• Now, the geometry of the input area is described by 4 points, so more configurations are possible, not only rectangular ones. To allow the input of nonrectangular areas, put a tick into the checkbox in the settings for the “Allow nonrectangular input” item.
• “My documents” is set as the initial folder for the "load \ save to" functions.
• New options in Mapio FX - enable \ disable the cursor and "Only output" - to disable automatic switching of display modes (input \ output).

Many bugs have been fixed. Some elements of the interface have been enhanced.

About support of VDMX5 (beta8) – I have fixed bugs in the demo mode on VDMX5beta, but the overall testing is still in progress. I would be glad if you try Mapio on the latest version of VDMX5 and report bugs. So, support of VDMX b8 is now in beta status. I would like to thank the VDMX5 team for support and for implementation of the functionality for Mapio.

New price is 149 Euros (not including VAT for Eurozone)

(2 and more licenses for 125 EUR per unit)

Academic license with a 50% discount is also available, please contact me

IR Mapio download - Windows - Mac OS X

1 Comment Read More

Crash fixed + MAC OS version:

MAC OS X - http://irworkshop.com/dl/IRMapio_v1.2_beta2.dmg
Windows - http://irworkshop.com/dl/IRMapio_v1.2_beta2.msi

Any problems or questions - write a email or to facebook (see the contacts in the lower left corner)

Release version will be ready in 2 weeks. Hurry up to purchase a license, because the price after the release 1.2 will be increased.

0 Comments Read More

Many people were waiting for a new feature of blending the edges, so we pre-release 1.2 with this feature.

For Windows - IRMapio_v1.2_beta.msi

Try it! And let us know your experience with this.

0 Comments Read More

Uploaded a minor update of IRMapio to version 1.1b.

This update contains several bug fixes. And the color of the mouse cursor is now red.

Download links: Windows MAC OS

1 Comment Read More

I am excited to announce our IR Mapio 1.1 update that supports masks and multiple instances. Now it’s possible to draw and edit masks right in the Mapio editor with the ongoing control over the output.

Below is the list of new features and improvements:

1. The update lets you draw and edit masks as polygons and ellipses right in Mapio. You can use the ESC key to cancel the last point. Besides, you can finalize a polygon with a double-click, and delete a polygon point with a double-click during editing.
2. Support for more than one FFGL plug-in instance in the host application.
3. In the Edit mode, the mouse cursor from Mapio is displayed right in the output video stream. This lets you stay focused on the projector picture, rather than look at the computer screen.
4. Separate Effects panel for quick editing and switching between effects.
5. Workspace zoom-in/out that lets you insert area knots with pinpoint precision.
6. New buttons for rotating areas. Areas in the editor can help you see where the top and bottom of the stream will be. The bottom edge of the video stream corresponds to a thick line.
7. FFGL plug-in has a new parameter to enable (disable) the grid in the Edit mode.
8. New to the update is a special grip to move an area as a whole.
9. Now you can disable the Snap mode by pressing the ALT key (formerly CTRL). However the mode for dragging several knots simultaneously is disabled by pressing the CTRL key as before.

So, as I have informed you lately, the price has grown up to 77 Euro.

Version 1.2 is scheduled for release in May-June 2011. That release will deliver a new feature called Blending, plus a range of other enhancements. After the release of version 1.2, the cost of the product is expected to grow. Keep this in mind and do not delay the purchase.

Download links: Windows MAC OS

Thanks!

0 Comments Read More

IRMapio is a set of editor and plug-in of FreeFrameGL standard to arrange 2D mapping projections of arbitrary complexity. The editor allows assigning up to 64 transformation areas. Each transformation modifies arbitrary section of input video stream into arbitrary section in output stream. It is possible to independently assign both regular linear keystone correction and non-linear correction for each area. It allows to create a multi-screen projection using one or more projectors.

Key features:

• Online editing of transformation areas (the changes are immediately applied to the video stream in the edit mode)
• Allows to display projection on the curved surfaces – sphere, cylinder – with adjustable curvature
• High performance
• Save and load the configurations created
• Available for Windows and MacOS X platforms.

More...

0 Comments Read More

IRKeystone2, IRKeystone3 a FFGL plug-ins for dualhead/triplehead keystone correction!

If you use a multi-screen setup with Resolume Avenue and the projector placement is not optimal, you probably will want to correct the projected image. But correction in the beamers is limited and looks not good, so ... you need this!

Windows - http://irworkshop.com/dl/IRKeystoneWin.zip

Mac OS X - http://irworkshop.com/dl/IRKeystoneMACOS.zip

4 Comments Read More

Is analogue of IRFaderSA only now it is possible to enter any OSC a command.
OSC commands sends on localhost:7000 in bundle mode.
In Resolume Avenue works only since version 3.3.0.

Look demo\tutorial on youtube

Download:
Windows - http://irworkshop.com/dl/IR_OSC_SA_WIN.zip
Mac - http://irworkshop.com/dl/IR_OSC_SA_MAC.zip

For any questions use contact email or forum.

Is freeware, enjoy!

2 Comments Read More

Increased range of parameter СlipN, now you can automate up to 30 clips in a layer. And fixed a bug related with the position in the clip when you change the current clip.

0 Comments Read More

changes:

1. Alpha channel support for all modules
2. Accurater work with aspect ratio of 3D objects and a screen.
3. Some new parametres: "Mirror mode" for IR Tunnel, rotation of all scene for IR ArrayOfBoxes and IR ArrayOfScreen.
4. Added "Smooth edges" mode.
5. New presets

0 Comments Read More

What's new? Some bugs are fixed for more stability. We reduced the system requirements. Completely redesigned FFGL "IR Tunnel", now supports the effect of the delay. Added some new presets. And above all version for MAC OS X is realized.

0 Comments Read More

This is a simple automation of the clip's position in the timeline through a step sequencer, which is made as FFGL plug-ins for Resolume Avenue 3. IR ClipSA allows You to automatic changing current clips like a ChaosMode in Resolume 2.хх.

IR ClipSA contains of four modules differ in the number of steps.

Clip's control is made by OSC. Therefore,  there must be enable an OSC (Open Sound Control) which uses incoming port 7000.

Implemented as FFGL fx allows You to control the automation without switching to other applications.

Available Windows and MAC OS versions.

More

0 Comments Read More

IR Cosmic pack 1.0 for Windows is now on sale. You can use multiple payment methods, it is convenient, fast and safe.

Russian, in addition to providing a means of payment can take payment via WebMoney and Yandex.Money, for details, please contact us.

0 Comments Read More

FFGL plugins "IR CosmicPack" soon for sale

0 Comments Read More